News Center
Baitong will continue to give full play to its comprehensive advantages in the field of wire mesh products, constantly meet customer needs, to provide high-quality products and services for global partners.
News Center
Baitong will continue to give full play to its comprehensive advantages in the field of wire mesh products, constantly meet customer needs, to provide high-quality products and services for global partners.
Briefly describe the characteristics and production process of wedge wire sieve plate
Release Time:
2022-12-20
Easy to leak, wear-resistant and corrosion-resistant, the cross-section of the mesh is trapezoidal, and the gap is narrow at the top and wide at the bottom.
Features of wedge wire sieve plate
1. Easy to leak, wear-resistant and corrosion-resistant, the cross-section of the mesh is trapezoidal, and the gap is narrow at the top and wide at the bottom.
2. Good wear resistance and long service life. Due to the unique and excellent materials used in this product, the structural design is more perfect. Its service life is more than twice that of domestic similar products.
3. The maintenance workload is small. The structure is reasonable, not easy to be damaged, and the service life is super long, so the loss of maintenance and shutdown maintenance can be greatly reduced.
4. Low cost of use. Although the price of this product is slightly higher than that of domestic products of the same type, due to its long service life, the total cost of users is greatly reduced.
5. Reasonable design of sieve holes, unique manufacturing process of sieve sheets, particles of extreme size will not block the sieve holes, and the screening efficiency is high.
Production process of wedge wire sieve plate
The running track of the material on the screen surface makes the small particle material and the large particle material unable to be classified. Usually this situation is mostly a problem with the angle of the vibration motor. Generally, the motor angle of the vibrating screen is adjusted to 65 degrees when it leaves the factory, and the motor angle can be adjusted according to the screening situation of the material during use. To change the running track of the material on the screen surface. To improve the screening accuracy. If it is a wedge-shaped wire sieve reel, experts recommend using a parallelogram in order to connect the supporting bars, so that the welded wedge-shaped wire sieve not only has a more beautiful appearance, but also makes the welding more beautiful.
As a commonly used punching plate, wedge wire sieve plate is the one with smaller volume and higher screening efficiency. Its processing material selection is often inseparable from its quality. The following is the content of its processing material selection:
1. Single-sided and double-sided galvanized steel sheets. Single-sided galvanized steel sheet, a product that is galvanized on only one side. In terms of welding, painting, anti-rust treatment, processing, etc., it has better adaptability than double-sided galvanized sheet. In order to overcome the shortcomings of one side not being galvanized, there is another kind of galvanized sheet coated with a thin layer of zinc on the other side, that is, double-sided differential galvanized sheet.
2. The processing material of the wedge wire sieve plate is very critical. In the process of processing raw materials, it is necessary to inspect the plate. The working environment and effect of sieve plates produced by different materials are different.
Key words：
Spotlight
