Categories

Hot Products

Laterials

Laterials

These assemblies consist of a series of screen laterals connected to either a central header pipe or a hub. They are designed for effective media retention in a wide range of applications, including ion exchangers, clay and sand filtration applications and carbon towers.
Inline Strainer

Inline Strainer

A resin trap is a safety device used on the overflow lines of ion exchange units, high-purity water systems and activated carbon and media filters.
Filter Nozzles

Filter Nozzles

Nozzles are used in liquid/solid or gas/solid separation. Their design and quantity will vary depending on application and customer-flow requirements. Nozzles allow a more effective use of the treatment media.
Water Well Screens Welding Ring

Water Well Screens Welding Ring

When you need to successfully finish an environmental drilling job, BT water well screen is an irreplaceable choice. It can efficiently prevent the unneeded sands from entering the well, while achieving higher productive efficiency and longer using life of the well.
Water Well Screen Threaded Connection

Water Well Screen Threaded Connection

When you need to successfully finish an environmental drilling job, BT water well screen is an irreplaceable choice. It can efficiently prevent the unneeded sands from entering the well, while achieving higher productive efficiency and longer using life of the well.
Radial External Wire

Radial External Wire

These tubes are composed of a surface profile wire that is spirally wrapped around axial support wires and attached to each other by resistance welding.
Screw Press Separator

Screw Press Separator

For dewatering using a screw press, we can provide a screen designed to meet your exact specifications.
Flattened Slot Tube

Flattened Slot Tube

Depending on the required specifications, BTOSLOT can also opt to produce from a slot tube. Subsequently the tube is split open, flattened and cut to the required size.
+
  • Laterials.jpg

Laterials

These assemblies consist of a series of screen laterals connected to either a central header pipe or a hub. They are designed for effective media retention in a wide range of applications, including ion exchangers, clay and sand filtration applications and carbon towers.

  • Commodity name： Laterials

Category:

Radial External Wire

Email:

sally@baitongfilter.com

Get a quote
Related Products
  • Product Description

  • Laterial Distributor / Collector 

    These assemblies consist of a series of screen laterals connected to either a central header pipe or a hub. They are designed for effective media retention in a wide range of applications, including ion exchangers, clay and sand filtration applications and carbon towers.

    Features

    • Lateral spacing, length, diameter and slot opening sizes are based on individual  system need: slot size 0.002 in. (0.05 mm) and up in 0.0004 in. (0.01 mm) increments and diameter from 0.79 in. (20 mm) and up

    • Assemblies are typically made with type SS304, SS316L or other exotic alloys are also available

    • Connections of the laterals can be threaded fittings, couplings or flanges.

    Benefits

    • The design allows a uniform collection or distribution flow of a gas or liquid through treatment media without dead zones.

    • The system can accommodate a wide variety of vessel sizes and shapes with side, center, top or bottom inlet piping.

    • The assemblies can be designed to accommodate flow in any direction.

Btoslot specializes in many different stainless steel alloys

AISI DIN UNS Trade Name
430 1.4016 S43000  
304 1.4301 S30400  
321 1.4541 S32100  
316L 1.4404 S31603  
316Ti 1.4571    
  2.436 N04400 Monel400
  2.4819 N10276 HastelloyC276
2205     Super duplex
2507     Super duplex

 

Better in every way

Wedge wire, also known as profile wire or V-wire, can be configured to a variety of forms, sizes, and open areas. The result is a very strong product with a smooth surface that is resistant to clogging. This makes wedge wire advantageous for a diverse range of applications that require screening, filtering, dewatering, sizing, drying or cleaning. 

Better in every way

Compared to wire mesh and perforated metal, Wedge Wire’s continuous slots have more open area. Their consistent slots are more durable and virtually non-clogging to reduce media abrasion.

Designed and manufactured

Our grids have great design flexibility and are constructed in a wide variety of shapes and sizes and from a variety of corrosion-resistant alloys. Specific processes and vessel requirements can be accommodated. For available corrosion-resistant materials, see material list.

Benefits of our support grids include:

(a)Continuous-slot design provides an increased open area .

(b)The continuous slot formed by V-shaped surface wires ensures a two-point contact between the particles and the slot to minimize clogging.

(c)Wide range of profile wires are available to suit most applications.

(d)High-precision slot sizes are available to meet your requirements.

(e)V-shaped surface wires allow for easy cleaning.

(f)Very low pressure drop.

(g)Additional supports are utilized to accommodate extreme load conditions.

(h)Low maintenance.

Key words:

Laterials

Get A Quote

Note: Please leave your email address, our professionals will contact you as soon as possible!

Submit Now